Volume 6, Issue 1, March 2018, Page: 7-11
New Trends to Improve the Raw Materials of Automotive Parts/Spare Parts
Mahmoud Mohamed Ahmed Sayed, Mechanical Engineering Department, Canadian International College, Cairo, Egypt
Received: Dec. 28, 2017;       Accepted: Jan. 17, 2018;       Published: Feb. 7, 2018
DOI: 10.11648/j.ajma.20180601.12      View  2642      Downloads  206
The automotive industry is one of the important industries which affected by raw materials of parts/spare parts. This work is applied research on the automotive products, such as main parts, and spare parts. The automotive products meet lot of problems, which come from certain causes such as environmental conditions. This work faces these problems and solves it, by taking some actions. Selecting raw materials which represent main causes of the problems and treatment it. This work uses analytical tool (Root – Cause Effect) to find out the root causes. Also, this work used new trends to improve the performance of raw material which uses in manufacturing of products such chemical treatment.
Raw Materials, Root – Cause Effect, Material in Manufacturing
To cite this article
Mahmoud Mohamed Ahmed Sayed, New Trends to Improve the Raw Materials of Automotive Parts/Spare Parts, American Journal of Mechanics and Applications. Vol. 6, No. 1, 2018, pp. 7-11. doi: 10.11648/j.ajma.20180601.12
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Tong Qiu, Raw materials use reduction, replacement, and recycling, Environment and development, Vol. 11, 2012.
Mikell P. Groover, Fundamentals of modern manufacturing: materials, processes and systems, John Wiley & Sons, Inc., 2010.
Report on critical raw material for the EU, May 2014.
S. Kalpakjian and Steven R. Schmid, Manufacturing Engineering and Technology, Prentice Hall 2009.
New technology Coatings for Corrosion Control, A JPCL eBook, Technology Publishing Company, Pittsburgh, PA., 2012.
S. Golfomitsou and J. Merkel, Synergistic effects of corrosion inhibitors for copper and copper alloy archaeological artefacts, National Museum of Australia, 2012.
Robert B. Faltermeier, A corrosion inhibitor test for copper-based artifacts, Studies in Conservation 44, 1999, pp. 121-128.
B. V. Rao, and B. Sreedhar, Corrosion protection of copper by self-assembled monolayers, Indian Journal of Chemical Technology, Vol. 16, 2009, pp. 25-31.
Dušan Sabadka, Application potential of composite materials in automotive industry, Transfer inovácií, 2015.
Shama Rao N, et., Automotive Mega Trends USA, Michigan, Mar 17, 2015.
Browse journals by subject