Volume 7, Issue 1, March 2019, Page: 10-14
Effect on Strength of Concrete by Partial Replacement of Ordinary Portland Cement with Silica Fume
Farhan Hussain Wagan, Irrigation Department, Government of Sindh, Karachi, Pakistan
Naila Qadir Hisbani, Irrigation Department, Government of Sindh, Karachi, Pakistan
Ghulam Hussain Wagan, Civil Engineering, Swedish Engineering College, Raheem Yar Khan, Punjab, Pakistan
Received: May 9, 2019;       Accepted: Jun. 13, 2019;       Published: Jun. 26, 2019
DOI: 10.11648/j.ajma.20190701.12      View  32      Downloads  11
Abstract
Now a days, the increased use of scrap/waste as construction material has proved to be very harmful for the environment particularly in tropical countries like Pakistan. Researchers are trying at their best to reduce the adverse impact of waste material on the required environment but yet until more work is required in this regard. In this research paper authors have tried to reuse Silica Fume as construction material as it is very easily available in market as waste material from raw material /by- product industrial waste materials used in mills. The Authors obtained silica fume after proper screening the concerned industrial waste. These industries are available in grater quantity in the province of sindh. The required waste material is available in huge quantity. Silica is very important construction material and by using this as waste we can protect our environment by reusing or proper use of waste material. Here, researchers took different percentage of silica fume and mixed with concrete in varying ratio as replacement of Ordinary Portland Cement as active material in laboratory. Results were came, very interesting and found Tensile Strength, Compressive Strength and Flexural Strengths near to Ordinary Portland Cement also other properties of concrete like pH value, Slump, Curing and Temperature of Concrete shows satisfactory results at various percentage of Replacement with Ordinary Portland Cement. The research work has yielded the satisfactory results and the silica fume can be used effectively as an active construction material. Different percentage shows different results but at 5% and 10% mixing of silica fume indicated high strength as compare to ordinary cement mix and the controlled temperature 280c. Further, Engineering is a vast field and it needs more research with passage of time.
Keywords
Concrete, Silica Fume, By-Product Industrial Waste Materials, Compressive Strength, Tensile Strength, Flexural Strength, Workability of Concrete, Result, Discussion
To cite this article
Farhan Hussain Wagan, Naila Qadir Hisbani, Ghulam Hussain Wagan, Effect on Strength of Concrete by Partial Replacement of Ordinary Portland Cement with Silica Fume, American Journal of Mechanics and Applications. Vol. 7, No. 1, 2019, pp. 10-14. doi: 10.11648/j.ajma.20190701.12
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Yunsheng Xu and D. D. L. Chung, “Improving the workability and strength of silica fume concrete by using saline treated silica fume” cement and concrete research Journals published (on line), 1999.
[2]
Kanstad, Biontegard, O, sellevold, EJ, Hammer, T. A and Fidgestol, P, “Effect of silica fume on crack sensitivity”, concrete International Journal, December 2001 pp 53-59.
[3]
Hooten RDC, “Influence of silica fume replacement of cement on physical properties and resistance to sulphate attack freezing and Thawing, and Alkali silica reactivity, Aci Material Journal, No. 2 90 (1993) 143-151
[4]
Bhanja, S and Sengupta, B, “Influence of Silica fume on the tensile strength of concrete”, cement and concrete research, 35, (2005) pp 743-747.
[5]
Banja S, Sengupta B, “Optimum silica fume content and its mode of action on concrete” Acimaterials Journal, September – October 2003. pp, 407-412.
[6]
Tiwari A, Momin I, “Improving early age strength of PSC with indigenous silica fume”, The Indian Concrete Journal, October 2000, pp, 595,98.
[7]
Yogendran V, Langen BW, Haque MN, Ward MA, “ Effect of silica fume on high strength concrete”, ACD Material Journal, No. 2, 84 (1987) 124-9.
[8]
AASHTO M 295, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, American Association of State Highway and Transportation Officials, Washington, DC, 2007.
[9]
Barrow, R. S., Hadchiti, K. M., Carrasquillo, P. M. and Carrasquillo, R. L., "Temperature Rise and Durability of Concrete Containing FlyAsh," Proceedings of the Third International Conference on theUse of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, (Ed. V. M. Malhotra), ACI SP-114, Vol. 2, American Concrete Institute, Detroit, 1989, pages 331 to 347.
[10]
Carette, G., Bilodeau, A., Chevrier, R. L. and Malhotra, V. M., "Mechanical Properties of Concrete Incorporating High Volumes of Fly Ash from Sources in the U. S.," ACI Materials Journal, Vol. 90, No. 6, 1993, pages 535 to 544.
[11]
Concrete Society, The Use of GGBS and PFA in Concrete,” Technical Report No. 40, The Concrete Society, Wexham, Slough, 1991, 142 pages.
[12]
Cross, D., Stephens, J. and Vollmer, J., “Field Trials of 100% Fly AshConcrete,” Concrete International, September, 2005, pages 47 to 51.
[13]
Rizwan Hussain Wagan, Farhan Hussain Wagan & others, "The Effect of Waste Tyre Steel Fibers distributionCharacteristics on the Flexural Strength of Concrete with Improving Environmental Impact in Pakistan" American Journal of Applied Scientific Research, ISSN 2471-9722 (2017).
[14]
Rizwan Hussain Wagan, Farhan Hussain Wagan & others, " Study on flexural Strength of Concrete Beams by Using Steel Fibers Extracted from Wasted Tyres in Pakistan " East African Scholars Journal of Engineering and Computer Sciences volume I, Issue I, ISSN - 2617-4480 (2018).
Browse journals by subject